In21 Now Wireless Monitor Kits

In21 Now

Caravan & Motorhome

Gadgets & Gifts

More Information

Online Catalogue > Cameras / CCTV > Wireless Monitor Kits

		JMCDVR: 4 Channel Wireless Handheld 2.5" TFT LCD PVR / DVR Recorder with Portable Wireless Camera Small and portable handheld wireless audio video receiver/recorder with a 2.5 inch full colour display for easy viewing of your videos. Record video directly to an SD card and then easily transfer the video to your PC via USB connection. * 2.4GHz 4-channel wireless receiver & monitor with DVR. * Wireless camera (Li-battery operated, 380 TV Lines, 1/3" CMOS) * 882228 high-definition 2.5inch TFT LCD display screen Inbuilt 64MB memory block, MMC, SD card, U disc, mobile HD memory, reading and writing supported. * Inbuilt high-capacity Lithium battery, 5h continuous playtime. Price: £141.00 (Including: VAT at 17.5%)


		DDAISY: Dancing Daisy Complete Colour Wireless Video Baby monitor Kit, 2.5" TFT LCD Screen, Night Vision, Microphone & Soft Lights This Goscam 819E flowercam is a great audio-visual colour video baby monitor. Light and easy to use handy clamp;can also add other cameras to the multi-channel receiver. Switch on/off soft night lights by touching the flower stalk. Both Cam and receiver can run on mains, with the receiver also having a built-in re-chargeable Lithium battery. Funky Flowercam Design Price: £117.50 (Including: VAT at 17.5%)


		CAPPLE: Apple Wireless Baby Monitor 2.5" LCD Night Vision & Alarm Brand new Digital Baby Monitor 2.5". No interference with WiFi, This Wirelless Digiral Baby Monitor usese Digital Spread Spectrum Technology to enhance wireless performance. Digital transmission, 25FPS. "Sleep mode" let parents have a good sleep when baby is asleep. PIR montion alarm. Temperature display of baby's room 16 lullabies. Time display. Cute housing design with rubber feel. Price: £117.50 (Including: VAT at 17.5%)


		BABYKANGOO: Rimax Advanced Digital Wireless Baby Monitor NEW FOR 2010 * The Rimax Digital Kangoo is the latest generation of wireless baby monitors. Utilising digital technology, it provides an excellent image with superior quality and clarity. The image is interference free, secure and private. * The system will work up to a range of 450 ft (reduced by walls and ceilings) and a safety warning system notifies you if the camera and monitor are out of range. As well as transmitting video, you will also be able to hear any noises your child makes. * For low light environments the system includes a night-vision feature. This can be turned on or off at either the camera or the monitor. Included is an Audio/Video cable that can be used to connect the receiver to a TV/Monitor or a recording device. * Additional cameras can be added to the system (maximum of four) and these can be purchased separately. * The Digital Wireless signal transmission type used in this digital unit is also known as FHSS Frequency Hopping Spread Spectrum. This type of signal is highly resistant to deliberate jamming as it generates a channel hopping sequence using an algorithm generated by the receiver system. The 2.4GHz (2.400-2.483Ghz) band is being divided into sections or paths of 2MHz per section, and each second the transmission signal hops hundreds of times in a specified sequence within this frequency range. The overall bandwidth required for frequency hopping is much wider then 2MHz however because transmission occurs only on a small section of this bandwidth at any given time, the signal being transmitted does not suffer from greatly reduced signal degradation and also avoids blocked paths other devices who act as sources of competing signals. The strength of the signal being transmitted is set to be from 13.5-16dBm, which is much higher then the analog transmission signal allowed by authorities around the Globe. When an image is captured by the camera it is instantly converted from an analog to digital signal and packaged into small packets. With each successful transmission via the 2Mhz paths discussed above, the packets of information containing images are delivered to the receiver and decoded into analog information. The information can then be displayed on devices that are connected to the wireless receiver (RX). A device pairing process is required to synchronize the transmitter (TX, Camera) and the receiver (RX). This allows the transmitter and receiver to be on the same frequency and use the same algorithm for frequency hopping. This ensures that only the paired transmitter and receiver can maintain communication signal by hopping to the same frequency paths at the exact same time. As a result, the chance that other devices within the same frequency range are on the same frequency, at the same time and in the same order is extremely unlikely. Price: £152.75 (Including: VAT at 17.5%)